Is Nonstick Cookware Safe? PFAS, PTFE, Scratches & Heat
TL;DR
- Surface abrasion in a 2022 Raman imaging and electron microscopy experiment estimated that thousands to millions of PTFE microplastic and nanoplastic particles can be released during simulated cooking, while 2025 human intestinal-cell and 2026 Drosophila studies found mitochondrial disruption, oxidative stress, and DNA damage from nanoscale and microscale PTFE particles despite a 2022 mouse study reporting no blood detection or toxicity from larger 5 to 50 µm particles.
- Surface temperature governs thermal decomposition in PTFE cookware: a 2015 laboratory study of four PFOA-free pans and nine coated consumer products measured markedly higher perfluoroalkyl carboxylic acid (PFCA) emissions above 260°C and a high emission rate at 370°C compared with normal use below 230°C, while a 2015 clinical review identified 18 human cases of PTFE fume-induced pulmonary edema and a 2012 veterinary report documented fatal PTFE fume toxicosis in birds.
- Smaller nonpolymeric PFAS persist in human blood for years, with a 2024 meta-analysis of 13 post-exposure human studies estimating mean biological half-lives of 1.5 to 5.1 years for PFOA, 3.4 to 5.7 years for total PFOS, and 2.8 to 8.5 years for PFHxS, supported by 2024 serum albumin and globulin binding measurements and 2023 renal OAT4 transporter reabsorption findings.
- Epidemiological research on smaller PFAS in blood associates exposure with lower childhood tetanus and diphtheria vaccine antibody levels in 587 children, elevated liver-injury biomarkers in 7,484 US adults, increased kidney cancer risk in 32,050 PFOA-exposed community members and workers, higher adult total and LDL cholesterol across 74 studies, and altered thyroid hormones across 16 PFAS compounds.
- BPA-free and PFOA-free labels do not establish that a pan, air-fryer basket, or baking liner is PFAS-free; reducing fluorinated food-contact materials calls for verified nonfluorinated cookware such as 18/10 or nickel-free 18/0 stainless steel, cast iron, carbon steel, heat-resistant glass, or intact enamel matched to the cooking heat and acidity.
Key facts
- Thousands to millions of PTFE particles vs. 5 to 50 µm mouse and 250 nm cell models: A 2022 simulated-cooking study estimated thousands to millions of released PTFE microplastics and nanoplastics from damaged coatings; 50 to 200 µg/mL of 250 nm and 2 µm PTFE particles induced oxidative stress, mitochondrial disruption, and DNA damage in human intestinal cells over 24 to 48 hours without reducing cell viability, whereas 5 to 50 µm particles at 500 to 2,000 mg/kg/day in 160 mice showed no treatment-related toxicity or blood uptake.
- Below 230°C normal cooking vs. above 260°C and 370°C overheating: A 2015 laboratory test of four PFOA-free pans found much higher perfluoroalkyl carboxylic acid emissions during overheating above 260°C and at 370°C than below 230°C, and a 2015 clinical review documented 18 human cases of PTFE fume-induced pulmonary edema alongside avian fatal toxicosis reports.
- 1.5 to 8.5-year human PFAS half-lives and OAT4 kidney reabsorption: Across 13 human studies after primary exposure ended, estimated mean elimination half-lives were 1.5 to 5.1 years for PFOA, 3.4 to 5.7 years for PFOS, and 2.8 to 8.5 years for PFHxS, driven by binding to serum albumin and globulins and renal reabsorption via the OAT4 transporter in six of seven tested PFAS.
- 18/10 vs. 18/0 stainless steel and 20-food cast-iron cooking tests: Cooking tomato sauce and lemon marmalade for one hour in 18/10 stainless steel pots increased nickel and chromium release with acidity and time while staying below allergy thresholds, and cooking 20 foods in iron utensils increased iron content across most foods depending on acidity, moisture, and duration.
Nonstick cookware safety depends on the coating, wear and heat. BPA-free and PFOA-free labels do not establish that a surface is PFAS-free. For reducing fluorinated food-contact materials, clearly identified nonfluorinated surfaces are a practical preference. Existing PTFE cookware calls for avoiding damaged coatings and severe dry overheating.
A 2022 simulated-cooking experiment estimated thousands to millions of released PTFE particles under different damage conditions; severe overheating has separately caused respiratory injury in people. Certain smaller PFAS remain in the body for years, while PTFE particles have different experimental evidence and no established equivalent human retention values. The useful checks are the actual surface material, its condition and its suitability for the intended heat.
Your nonstick pan may say BPA-free or PFOA-free. These labels name particular substances; they leave the remaining coating composition unanswered. A PFOA-free pan can still have a PTFE coating, and a 2015 laboratory study measured fluorinated emissions from pans marketed as PFOA-free.
Physical wear and excessive heat raise different questions. Scratching can release coating particles, while severe overheating can generate harmful airborne substances. Those routes need to be considered separately from the human health evidence on smaller PFAS circulating in blood.
What are PFAS, PTFE and PFOA in nonstick cookware?
PFAS is a broad family of synthetic fluorinated chemicals. It includes both large polymers such as PTFE and smaller substances such as PFOA and PFOS; a 2026 chemistry review distinguishes nonpolymeric from polymeric PFAS and surveys technologies developed to break both down.
PTFE is the plastic-like fluoropolymer widely used in nonstick coatings. Its surface prevents food from sticking; a 2017 perspective on cookware describes its use and the historical role of PFOA in manufacturing it. Related fluoropolymers include PFA, FEP and ETFE.
PFOA and PFOS are smaller PFAS, different from the coating plastic itself. Their long human elimination times are measured in years in exposed populations. BPA is a bisphenol used in certain plastics and resins, belonging to a different chemical family; BPS and BPF are other bisphenols.
Chemical resistance does not prevent physical wear or thermal breakdown.
What happens when a nonstick coating gets scratched?
Scratching can release PTFE particles. In a 2022 laboratory experiment, Raman imaging and electron microscopy identified particles from nonstick cookware and estimated that thousands to millions of microplastic and nanoplastic particles might be released during a simulated cooking process.
That estimate describes particle release under the tested damage conditions, rather than a measured swallowed dose. The finding makes coating condition relevant, while the biological significance depends on particle size, concentration, exposure duration and the model studied.
The PTFE experiments answer different questions:
- Oral exposure in mice: A 2022 four-week experiment involving 160 ICR mice compared approximately 5 µm and 10–50 µm particles at daily doses of 500–2,000 mg/kg with vehicle controls. No treatment-related toxic changes were reported. In a separate single-dose experiment involving 24 male mice given 2,000 mg/kg, particles were not detected in blood collected 15–120 minutes after administration.
- Human intestinal-cell models: A 2025 laboratory experiment used approximately 250 nm and 2 µm particles at 50–200 µg/mL over 24–48 hours. Compared with unexposed controls, it found particle uptake, mitochondrial disruption, oxidative stress, inflammatory responses and DNA damage, with effects varying across models and exposure conditions. Mitochondrial membrane changes were tested at 200 µg/mL after 48 hours; cell viability was not significantly reduced across the tested concentrations.
- Fruit-fly larvae: A 2026 experiment used oral PTFE exposure in food. Five-day exposure experiments found intestinal structural damage and particle passage across the gut barrier, alongside mitochondrial and oxidative-stress changes. Follow-up assays used 125 and 500 µg/g wet food, compared with untreated controls; DNA damage was also examined in a separate 24-hour exposure assay.
The mouse experiment tested larger particles than the newer cell and fly experiments, and the exposure conditions differed. The cell experiment included both individual cell cultures and a mucus-producing intestinal-barrier model. Those models allow controlled examination of direct particle interactions, while the fly experiment examines exposure through a living digestive system.
For existing cookware, the practical reason to avoid a damaged coating is the measured release of particles from a deteriorating surface. Translating the cell and animal findings into a numerical human disease risk would require human exposure and outcome data that these experiments did not collect.
At what temperature does a nonstick pan overheat?
The coating's actual surface temperature matters more than the stove setting. A 2015 laboratory study tested four pans marketed as PFOA-free and nine other coated consumer products, comparing normal-use conditions below 230°C with overheating tests above 260°C. It measured much greater emissions of perfluoroalkyl carboxylic acids during overheating, with a high measured emission rate at 370°C.
These were particular test conditions, not one universal safety threshold. The study measured a group of fluorinated acids; severe PTFE fume exposure has separately been associated with acute lung injury.
A 2015 case report described a previously healthy 35-year-old man who developed pulmonary edema after a PTFE-coated pan remained on a gas stove for ten hours. The accompanying literature review identified 18 cases of PTFE fume-induced pulmonary edema, including that case.
Cooking conditions affect the chance of overheating:
- Empty preheating: Coated surfaces can reach high temperatures rapidly.
- Water-rich food: Sufficient water limits surface temperatures while it remains present.
- Oil: It can reach much higher temperatures and does not reliably prevent overheating.
For existing PTFE cookware, avoid severe dry overheating.
Birds are particularly vulnerable to fluoropolymer decomposition fumes. A 2012 veterinary report described fatal poisonings in two groups of recently hatched chickens housed with PTFE-coated heat-lamp bulbs; the paper also discusses pet-bird poisonings associated with overheated nonstick cookware. For households with pet birds, avoiding equipment that can release these fumes is a particularly relevant precaution.
Why do some PFAS stay in the body for years?
Certain smaller PFAS leave the human body slowly, with elimination differing by compound and population. A 2024 systematic review and meta-analysis included 13 human studies conducted after the main exposure source had stopped: five in exposed general populations and eight in exposed workers. Estimated mean half-lives ranged from approximately 1.5–5.1 years for PFOA, 3.4–5.7 years for total PFOS and 2.8–8.5 years for PFHxS.
A biological half-life represents the time needed for the amount in the body to fall by half. These ranges summarize different studies; they are not a personal clearance timetable.
Protein binding and kidney transport help explain this persistence. A 2024 laboratory study measured binding of multiple PFAS to human serum albumin and globulins, proteins involved in their distribution and transport.
A 2023 laboratory experiment tested seven PFAS in engineered human kidney cells. Six showed clear uptake through OAT4, a kidney transporter; PFBS was the exception. The result supports a possible contribution of OAT4-mediated reabsorption to slow urinary elimination of certain PFAS.
Continued intake can sustain internal exposure while elimination is slow. The multi-year half-lives above apply to specific smaller PFAS; solid PTFE particles have no established equivalent human blood-retention values in these studies.
What does human PFAS research show about health?
Human studies that measured specific smaller PFAS in blood, or estimated exposure in populations, associate them with immune, liver, lipid and thyroid-related outcomes, and PFOA with kidney cancer risk.
- Vaccine antibodies: A 2012 prospective Faroe Islands birth-cohort study recruited 656 children, with 587 participating in follow-up. Higher PFAS exposure was associated with lower tetanus and diphtheria antibody concentrations at ages five and seven.
- Liver markers: A 2024 analysis of 7,484 American adults used blood measurements from the 2009–2018 National Health and Nutrition Examination Survey. Exposure to five PFAS was associated with liver-injury biomarkers, including liver enzymes; this was observational evidence based on biomarkers.
- Kidney cancer: A 2026 cohort analysis followed cancer incidence through 2020 among 32,050 highly PFOA-exposed community members and workers in the mid-Ohio Valley. Greater cumulative exposure was associated with increased kidney cancer risk, with the strongest findings in younger community members. The paper also notes PFOA's classification as carcinogenic to humans.
- Blood lipids: A 2025 systematic review and meta-analysis of 74 epidemiological studies found positive associations of PFOA and PFOS with total and LDL cholesterol in adults. Associations varied by population; pooled results in pregnant women were not significant.
- Thyroid-related outcomes: A 2024 systematic review and meta-analysis examined 16 PFAS and five thyroid hormones in adolescents, pregnant women and adults, alongside animal and cell evidence. It reported associations involving thyroid health, depending on the compound and population.
These findings explain concern about prolonged exposure to certain smaller PFAS. A cookware-specific disease-risk estimate would require linking pan use to the relevant internal exposure and health outcome; these studies did not make that measurement.
Does PFOA-free mean PFAS-free?
PFOA-free is a claim about one substance. It does not exclude PTFE or every other fluorinated material. The distinction matters because PFOA has historically been used in fluoropolymer production, while PTFE is the coating polymer itself.
- BPA-free: Leaves unanswered whether PTFE or other PFAS are present.
- PFOA-free: Leaves unanswered whether PTFE or other fluorinated materials are present.
- PTFE-free: Leaves unanswered whether another PFAS is present.
- PFAS-free: Leaves unanswered whether the claim reliably describes the complete food-contact material.
For avoiding fluorinated coatings, PFAS-free is the broader relevant declaration, provided the claim is reliable. Check the identified material and declared coating composition alongside the label. “Ceramic-style” and “stone-effect” descriptions alone do not establish a complete formulation.
Material identification also matters when considering pesticide residues in food or mineral oil in lip balm: each involves its own substances and exposure conditions.
What are the alternatives to fluorinated nonstick coatings?
For reducing fluorinated food-contact materials, clearly identified nonfluorinated surfaces suited to the cooking application are a practical preference. Avoiding a fluorinated coating still leaves material-specific questions about heat, acidity, cooking duration and surface condition.
Stainless steel
Alloy and use conditions matter. In a 2017 laboratory study, tomato sauce and lemon marmalade were cooked for one hour in used and unused 18/10 stainless steel pots; water-based solutions at different pH values were also tested. Nickel and chromium release increased with time and acidity, was higher in unused pots, and differed between manufacturers.
The measured releases were below known allergy-triggering thresholds in those experiments. The paper considered common use suitable for most nickel- or chromium-allergic people, while noting that total food-plus-pot exposure could matter for highly sensitive individuals.
18/10 and 18/8 contain chromium and nickel; 18/0 contains little or no intentionally added nickel. For someone considering nickel exposure, the actual alloy and the duration of acidic cooking are more informative than the word stainless alone.
Cast iron and carbon steel
Iron transfer is part of the material choice. A 1986 food-cooking experiment compared 20 foods prepared in iron and non-iron utensils. Most contained more iron after cooking in iron utensils, with acidity, moisture and cooking time influencing transfer.
That extra iron is particularly relevant for someone managing an iron-overload disorder. Carbon steel also warrants attention to iron transfer; intact seasoning can reduce direct food-metal contact.
Glass, enamel and ceramic coatings
The suitable choice depends on the actual surface and its rated application:
- Heat-resistant glass: Useful for specified oven and storage applications. Thermal shock and incompatible direct heat can cause breakage.
- Enamel: A glass-like coating over metal. Manufacturing quality, chips and cracks matter.
- Ceramic nonstick: An engineered coating on a base material, different from solid ceramic cookware. Its exact formulation still matters.
Check the food-contact composition, surface condition and heat-source compatibility. No material is ideal for every cooking task.
The action plan
What should you check in air fryers, liners and baking paper?
Check each food-contact component, including the basket, removable insert and tray. A compatible liner may reduce direct contact with a coated surface and limit scraping during cleanup, but it does not prevent the underlying coating from heating or eliminate fumes if that coating severely overheats.
The same material questions extend beyond frying pans:
- Air-fryer baskets and trays: They may have fluorinated nonstick coatings; each component needs its own material check.
- Baking paper: Conventional parchment is often silicone-treated. Some grease-resistant papers have used PFAS, so the treatment needs checking product by product.
- Reusable baking sheets: Some contain PTFE-coated reinforcing fabric.
- Trays and molds: Nonstick alone does not identify the food-contact material.
For paper liners, verify appliance approval, temperature rating and unobstructed airflow. Loose paper near heating elements creates a fire risk.
A compatible basket or tray with a clearly documented nonfluorinated food-contact surface avoids relying on a liner as a separator. A liner's material and the appliance's underlying coating remain separate checks.
Summary: nonstick cookware at a glance
- Interpreting labels: BPA-free, PFOA-free and PTFE-free make different claims; reliable full material disclosure is more useful.
- Assessing an existing PTFE surface: Coating damage and severe dry overheating.
- Reading health claims: Smaller-PFAS human evidence, PTFE particle experiments and fume injuries concern different exposures.
- Choosing an alternative: Actual composition, heat, acidity, duration and surface condition.
- Using an air-fryer liner: Contact separation does not establish protection from overheating fumes.
- Cooking around pet birds: Particular vulnerability to fluoropolymer decomposition fumes.
The one-page recap
Fluorinated coatings, scratches and overheating
- Polymeric vs. nonpolymeric PFAS: PFAS encompasses both large fluoropolymers such as PTFE (alongside PFA, FEP, and ETFE) and smaller nonpolymeric compounds such as PFOA and PFOS, whereas BPA, BPS, and BPF belong to the bisphenol family.
- Particle release from scratched PTFE: A 2022 Raman imaging and electron microscopy study estimated that thousands to millions of PTFE microplastic and nanoplastic particles can be released under simulated cooking damage conditions.
- Experimental PTFE particle models: Four-week oral dosing of 5 µm and 10 to 50 µm PTFE particles (500 to 2,000 mg/kg/day) in 160 mice showed no toxic changes or blood uptake, whereas 250 nm and 2 µm PTFE particles (50 to 200 µg/mL) induced oxidative stress, mitochondrial disruption, and DNA damage in human intestinal-cell models and 5-day oral exposure in Drosophila larvae caused gut-barrier passage and mitochondrial changes.
- Surface temperature and PFCA emissions: In a 2015 study of four PFOA-free pans and nine coated products, perfluoroalkyl carboxylic acid emissions rose sharply during overheating above 260°C and at 370°C compared with normal cooking below 230°C.
- Fume-induced lung injury and avian sensitivity: A 2015 clinical review documented 18 human cases of PTFE fume-induced pulmonary edema after severe dry overheating, and a 2012 veterinary report confirmed high mortality in chickens exposed to PTFE-coated heat-lamp bulbs alongside pet-bird cookware toxicosis.
Human PFAS half-lives and health associations
- Multi-year human elimination half-lives: Across 13 post-exposure human cohorts, estimated mean blood half-lives were 1.5 to 5.1 years for PFOA, 3.4 to 5.7 years for total PFOS, and 2.8 to 8.5 years for PFHxS, which apply to smaller PFAS rather than solid PTFE particles.
- Serum protein binding and renal OAT4 reabsorption: Slow human clearance of smaller PFAS is explained by binding to human serum albumin and globulins and by uptake across the renal OAT4 transporter observed for six of seven tested PFAS (with PFBS as the exception).
- Epidemiological health associations: Human studies of smaller blood PFAS report associations with reduced tetanus and diphtheria vaccine antibody levels in 587 children, elevated liver-injury biomarkers in 7,484 US adults, increased kidney cancer risk in 32,050 PFOA-exposed individuals, higher adult total and LDL cholesterol across 74 studies, and altered thyroid hormone profiles across 16 PFAS.
Labels, cookware alternatives and air-fryer checks
- Decoding BPA-free and PFOA-free labels: BPA-free and PFOA-free claims address single substances and do not rule out PTFE or other fluorinated coatings; only a reliable PFAS-free disclosure backed by declared base and coating materials rules out fluorinated food-contact surfaces.
- Stainless steel alloy selection (18/10 vs. 18/0): One-hour acidic cooking of tomato sauce and lemon marmalade in 18/10 pots increased nickel and chromium release below allergy thresholds, while 18/0 stainless steel contains little or no intentionally added nickel.
- Cast iron, carbon steel, glass, and enamel: Cooking 20 foods in iron utensils increased food iron content (relevant to iron-overload disorders), while heat-resistant glass, intact enamel over metal, and ceramic nonstick each require checking heat compatibility and surface integrity.
- Air fryers, liners, and baking paper: Check the food-contact material of every air-fryer basket, tray, parchment paper, and reusable sheet individually, since a liner does not stop an underlying fluorinated coating from heating or emitting fumes if overheated.
Frequently asked questions
Can a PFOA-free pan still contain PTFE?
Yes. PFOA is a smaller chemical historically used in manufacturing, while PTFE is a coating polymer. A PFOA-free declaration does not establish that a product is PFAS-free, and a 2015 laboratory study measured perfluoroalkyl carboxylic acid emissions from four pans marketed as PFOA-free when heated above 260°C.
Should a scratched nonstick pan be replaced?
For avoiding contact with a deteriorating PTFE surface, replacing damaged cookware with a suitable, clearly identified material is a practical option. The 2022 Raman imaging abrasion experiment found thousands to millions of released PTFE particles under tested damage conditions; it did not establish a scratch-depth threshold or a human disease-risk estimate.
Does swallowed PTFE stay in the body for years?
The multi-year human half-life estimates of 1.5 to 5.1 years for PFOA, 3.4 to 5.7 years for PFOS, and 2.8 to 8.5 years for PFHxS concern smaller PFAS. Those values cannot be assigned to solid PTFE particles. The 2022 mouse experiment did not detect the tested particles in blood sampled during the first two hours after a single oral dose.
Is ceramic nonstick the same as solid ceramic cookware?
No. Ceramic nonstick describes an engineered coating applied to a base material, different from solid ceramic cookware. The exact formulation, heat-source compatibility, and suitability for the intended cooking conditions still need checking; a ceramic-style or stone-effect marketing name alone does not identify the complete surface.
Will a liner make a coated air fryer PFAS-free?
No. A compatible liner may reduce direct food contact and limit scraping during cleanup, while the underlying coating still heats and can release fumes if it severely overheats. The liner and the basket, removable insert, or tray each need their own material and temperature checks.
References
- Abass D, et al. (2025). Polytetrafluoroethylene (PTFE, Teflon) microplastics and nanoplastics induce oxidative stress, mitochondrial damage, and genotoxicity in human intestinal cells. Journal of Hazardous Materials, 499, 140255. PMID: 41167152.
- Alaraby M, et al. (2026). Polytetrafluoroethylene utensils as a source of micro- and nanoplastics: Insights from a Drosophila model. Eco-Environment & Health, 5(4), 100285 (online September 15, 2026; issue December 2026). PMID: 42861112.
- Brittin HC, Nossaman CE. (1986). Iron content of food cooked in iron utensils. Journal of the American Dietetic Association, 86(7), 897-901. PMID: 3722654.
- Du X, et al. (2024). Association between PFAS exposure and thyroid health: A systematic review and meta-analysis for adolescents, pregnant women, adults and toxicological evidence. Science of the Total Environment, 953, 175958. PMID: 39233077.
- Fischer FC, et al. (2024). Binding of Per- and Polyfluoroalkyl Substances (PFAS) to Serum Proteins: Implications for Toxicokinetics in Humans. Environmental Science & Technology, 58(2), 1055-1063. PMID: 38166384.
- Grandjean P, et al. (2012). Serum vaccine antibody concentrations in children exposed to perfluorinated compounds. JAMA, 307(4), 391-397. PMID: 22274686.
- Guarneri F, et al. (2017). Release of nickel and chromium in common foods during cooking in 18/10 (grade 316) stainless steel pots. Contact Dermatitis, 76(1), 40-48. PMID: 27804135.
- Hamaya R, et al. (2015). Polytetrafluoroethylene fume-induced pulmonary edema: a case report and review of the literature. Journal of Medical Case Reports, 9, 111. PMID: 25971706.
- Hofmann JN, et al. (2026). Perfluorooctanoic acid and cancer incidence: an updated investigation of a cohort in the mid-Ohio Valley. Environment International, 214, 110405. PMID: 42442238.
- Hori H, Saito H. (2026). Progress in the decomposition of PFAS: from small molecules to fluoropolymers. Chemical Communications, 62(75), 18561-18575. PMID: 42676285.
- Ji C, Pavuk M, Ruiz P. (2025). Global Serum Per- and Polyfluoroalkyl Substances Exposures and Their Correlation with Lipids: A Systematic Review and Meta-Analysis. Environmental Science & Technology, 59(37), 19611-19629. PMID: 40936172.
- Lee S, et al. (2022). In Vivo Toxicity and Pharmacokinetics of Polytetrafluoroethylene Microplastics in ICR Mice. Polymers, 14(11), 2220. PMID: 35683896.
- Louisse J, et al. (2023). Perfluoroalkyl substances (PFASs) are substrates of the renal human organic anion transporter 4 (OAT4). Archives of Toxicology, 97(3), 685-696. PMID: 36436016.
- Luo Y, et al. (2022). Raman imaging for the identification of Teflon microplastics and nanoplastics released from non-stick cookware. Science of the Total Environment, 851(Pt 2), 158293. PMID: 36030853.
- Rosato I, et al. (2024). Estimation of per- and polyfluoroalkyl substances (PFAS) half-lives in human studies: a systematic review and meta-analysis. Environmental Research, 242, 117743. PMID: 38008199.
- Sajid M, Ilyas M. (2017). PTFE-coated non-stick cookware and toxicity concerns: a perspective. Environmental Science and Pollution Research International, 24(30), 23436-23440. PMID: 28913736.
- Schlummer M, et al. (2015). Emission of perfluoroalkyl carboxylic acids (PFCA) from heated surfaces made of polytetrafluoroethylene (PTFE) applied in food contact materials and consumer products. Chemosphere, 129, 46-53. PMID: 25496745.
- Shuster KA, et al. (2012). Polytetrafluoroethylene toxicosis in recently hatched chickens (Gallus domesticus). Comparative Medicine, 62(1), 49-52. PMID: 22330651.
- Yan Y, et al. (2024). Association of exposure to per- and polyfluoroalkyl substances with liver injury in American adults. Journal of Biomedical Research, 38(6), 628-639. PMID: 38807427.